HSS - ECO Long Series Drill No. 511
Range of Application :
5% cobalt-alloyed high effi ciency drills with reinforced web with special designed flute
profile for better chip removal and deeper holes, suitable for steels up to 1100 N/mm².
HSS Extra Long Drill No.101, 111
Range of Application :
High effi ciency drills for extremely deep holes where working conditions such as
cutting speed, feed, coolant and frequent chip removal have to be observed.
HSS - ECO Taper Shank Drill No. 203
Range of Application :
5% cobalt-alloyed drills with high heat resistance
for drilling steels with tensile strength over 800 N/mm2.
Stub drills extra short series, DIN 1897 PZ
Range of Application :
5% cobalt-alloyed high-effi ciency drills with re-inforced web.
Specially suitable for drilling stainless steel, acid-resisting steel,
spring-steel. Best for hand held operations.
Stub drills extra short series, DIN 1897 PZ Coating:TiN
Range of Application :
5% cobalt-alloyed high-effi ciency drills with re-inforced web.
Specially suitable for drilling stainless steel, acid-resisting steel,
spring-steel. Best for hand held operations.
Jobber drills for INOX sheet metals and Hardox
Range of Application :
Specially suitable for drilling stainless steel,
acid-resisting steel, spring-steel as well as extremely
hard materials such as manganese steel,
high- tensile fine grained machinery steel (Hardox 400/500)
and similar materials.
HSS COUNTERSINKS
HSS Counterbores
Range of application :
For ferrous and non-ferrous metals, synthetic materials soft and hard,
for working in through holes according to DIN 273 Quality level “fine”.
Suitable in individual and mass production.
For countersinking Allen screws DIN 912, 6912, 7984
and cheese-head screws ISO 1207 (DIN 84).
Woodruff keyseat cutters
DIN850D Code1524
Range of application:
Recommended for milling in construction steels,
tempered steels and cementation steels with
standard tensile strength up to 1.100 N/mm²
and short-chipping of non-ferrous metals.
T-Slot milling cutters
DIN851AB Code1504
Range of application:
Schaftfräser für T-Nuten nach DIN 650 mit
Schrupp-Schlichtverzahnung. Empfohlen zum
Fräsen von Bau-, Einsatz- und Vergütungsstählen
mit normaler Festigkeit bis 1.300 N/mm² sowie
für kurzspanende NE-Metalle.
T-Slot milling cutters
DIN851AB Code1484
Range of application:
Milling cutters for T-slots according to DIN 650,
staggered teeth. Recommended for milling
in construction steels, tempered steels and
cementation steels with standard tensile
strength up to 1.100 N/mm² and
short-chipping of non-ferrous metals.
Quarter circle cutters
DIN6518B Code1464
Range of application:
Recommended for milling in construction steels,
tempered steels and cementation steels with
standard tensile strength up to 1.100 N/mm²
and short-chipping of non-ferrous metals.
Dovetail cutters
DIN1833D Code1424
Range of application:
Recommended for milling in construction steels,
tempered steels and cementation steels with
standard tensile strength up to 1.100 N/mm²
and short-chipping of non-ferrous metals.
Dovetail cutters
DIN1833C Code1394
Range of application:
Recommended for milling in construction steels,
tempered steels and cementation steels with
standard tensile strength up to 1.100 N/mm²
and short-chipping of non-ferrous metals.
Short shank cutters
Code1374
Range of application:
Recommended for milling in materials
with medium/high tensile strength up to
1.300 N/mm² as well as in titanium
and titanium-alloyed materials.
Short shank cutters
Code1356
Range of application:
Recommended for milling in materials
with medium/high tensile strength up to
1.300 N/mm² as well as in titanium
and titanium-alloyed materials.
